Welding Technology A100-
Arc and Oxy-acetylene Welding
(3)
Beginning course in arc and oxy-acetylene welding that covers safety practices, use of equipment, brazing and cutting operations, and applications to various types of steels. Two hours lecture, four hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A101-
Arc and Oxy-acetylene Welding
(4)
Beginning course in arc and oxy-acetylene welding that covers safety practices, use of equipment, welding in all positions, brazing and cutting operations, and applications to various types of steels. Two hours lecture, six hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A102-
Weld Testing GMAW
(.5)
(1-16 week course)
Weld testing for mastery of levels I, II, III and/or IV in the Gas Metal Arc Welding process. When completed, may lead to a Certificate of Specialization. A Certification Certificate will also be issued for the appropriate level. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. This course may be taken four times. One and one-half to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A103-
Weld Testing GMAW
(.5)
(1-16 week course)
Weld testing for mastery of Gas Metal Arc Welding process to the industry standard set by the Inter-Industry Conference on Auto Collision Repair (I-CAR) required tests. A Welder Qualification Certification will be issued. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. One and one-half hours to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A104-
Weld Testing GTAW
(.5)
(1-16 week course)
Weld testing for mastery of level I in Gas Tungsten Arc Welding process. When completed, may lead to Certificate of Specialization. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. One and one-half to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A105-
Weld Testing Basic
(.5)
(1-16 week course)
Weld testing for mastery of levels I, II, III or IV in Shielded Metal Arc Welding process. When completed, may lead to Certificate of Specialization. A Certification Certificate will also be issued for the appropriate level. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. This course may be taken four times. One and one-half to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A106-
Weld Testing Intermediate
(.5)
(1-16 week course)
Weld testing for mastery of levels V and/or VI in the Shielded Metal Arc Welding process. When completed, may lead to a Certificate of Specialization. A Certification Certificate will also be issued for appropriate levels upon successful completion. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. This course may be taken two times. One and one-half to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A107-
Weld Testing Advanced
(.5)
(1-16 week course)
Weld testing for mastery of levels VII, VIII, and/or IX in Shielded Metal Arc Welding. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. This course may be taken three times. One and one-half to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A108-
Weld Testing Advanced
(.5)
(1-16 week course)
Weld testing for mastery of levels I, II, III, and/or IV in Flux Cored Arc Welding. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. This course may be taken four times. One and one-half hours to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A109-
Weld Testing FCAW
(.5)
(1-16 week course)
Weld testing for mastery of levels V, VI, VII, VIII in Flux Cored Arc Welding. When completed, may lead to Certificate of Specialization. A certification will also be issued for the appropriate level upon successful completion. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. This course may be taken four times. One and one-half to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A110-
Weld Testing FCAW
(.5)
(1-16 week course)
Weld testing for mastery of levels IX in Flux Cored Arc Welding. When completed, may lead to Certificate of Specialization. A certification will also be issued for the appropriate level upon successful completion. Enroll only when ready to test. Fee charged for qualification test. One and one-half to twenty-seven hours laboratory.
Transfer Credit: CSU.
|
Welding Technology A111-
Weld Testing Pipe
(.5)
(1-16 week course)
Weld testing for mastery of levels I and/or II in the Pipe Welding process or Gas Tungsten Arc and Shielded Metal Arc Welding processes. Enroll only when ready to test. Fee charged for qualification test. Offered on a pass-no pass basis only. This course may be taken two times. One and one-half to twenty-seven hours laboratory
Transfer Credit: CSU.
|
Welding Technology A115-
Arc and Oxy-acetylene Welding Practice
(1-2)
Prerequisite:
Welding Technology A100 or concurrent enrollment.
A laboratory class to develop skills in arc and oxy-acetylene welding. This course may be taken four times. Three to six hours laboratory.
|